PDC4S:\A\AGI - 1911 3 Pack\AGI 308 and 309 - Building the Ultimate 1911 (2 of 4)

Up one directory...
NameSizeDate Modified
01 - Title.avi1,690 KB8/29/2012 2:59 AM
02 - Introduction.avi21,514 KB8/29/2012 2:47 AM
03 - Fitting the Slide to the Frame.avi113,682 KB8/29/2012 6:33 AM
04 - Positioning the Slide.avi57,454 KB8/29/2012 7:05 AM
05 - Barrel Types and Fitting.avi210,524 KB8/29/2012 3:51 AM
06 - Lock-Up.avi21,490 KB8/29/2012 2:50 AM
07 - Cutting the Lugs.avi51,480 KB8/29/2012 5:11 AM
08 - Fitting the Link.avi106,648 KB8/29/2012 6:49 AM
09 - Reaming the Barrel.avi53,842 KB8/29/2012 7:24 AM
10 - Ramping and Polishing the Barrel.avi32,242 KB8/29/2012 2:45 AM
11 - Installing a Full Length Guide Rod.avi37,888 KB8/29/2012 5:55 AM
12 - Pencil Test and Hang Test.avi24,706 KB8/29/2012 2:45 AM
13 - Installing the Firing Pin & Stop.avi31,774 KB8/29/2012 2:41 AM
14 - Tuning the Extractor.avi82,350 KB8/28/2012 2:19 PM
15 - Installing the Ejector.avi51,602 KB8/29/2012 7:38 AM
16 - Installing the Plunger Tube.avi32,776 KB8/29/2012 2:31 AM
17 - Installing the Grip Safety.avi29,698 KB8/28/2012 3:35 PM
18 - Installing the Trigger.avi62,460 KB8/29/2012 1:57 AM
19 - Fitting the Safety.avi39,938 KB8/29/2012 5:40 AM
20 - The Trigger Job.avi14,344 KB8/28/2012 2:59 PM
21 - The Trigger Job (Trigger Fixtures).avi7,180 KB8/29/2012 2:58 AM
22 - The Trigger Job (Sear-Trigger Relationship).avi24,400 KB8/29/2012 2:43 AM
23 - The Trigger Job (Continued).avi211,164 KB8/29/2012 3:31 AM
24 - Lubrication.avi28,680 KB8/28/2012 4:05 PM
25 - Fitting the Safeties.avi60,416 KB8/29/2012 2:19 AM
26 - Installing the Stock Screw Bushings.avi60,416 KB8/29/2012 2:23 AM
27 - Final Contouring.avi34,828 KB8/29/2012 4:19 AM
28 - Installing the Sights.avi89,084 KB8/29/2012 7:01 AM
29 - Final Thoughts.avi11,208 KB8/29/2012 2:56 AM
30 - Manufacturer's Information.avi22,456 KB8/29/2012 2:47 AM